Theft Deterrent / Keyless Entry

Electronic Key Oscillator (for Luggage Compartment)

~1min read

Components

COMPONENTS

ILLUSTRATION

*A

for type A

*B

for type B

*1

LUGGAGE COMPARTMENT PLATE ASSEMBLY

-

-

ILLUSTRATION

*1

NO. 3 INTERIOR ELECTRONIC KEY ANTENNA ASSEMBLY

-

-

Installation

INSTALLATION

PROCEDURE

1. INSTALL NO. 3 INTERIOR ELECTRONIC KEY ANTENNA ASSEMBLY

(a) Engage the clip to install the No. 3 interior electronic key antenna assembly, as shown in the illustration.

Install in this direction

NOTICE:

Be careful when installing the No. 3 interior electronic key antenna assembly. If the No. 3 interior electronic key antenna assembly is dropped, replace it with a new one.

(b) Connect the connector.

(c) Pull the right rear seatback assembly rearward.

2. INSTALL LUGGAGE COMPARTMENT BOARD ASSEMBLY

Click here

Removal

REMOVAL

PROCEDURE

1. REMOVE LUGGAGE COMPARTMENT BOARD ASSEMBLY

Click here

2. REMOVE NO. 3 INTERIOR ELECTRONIC KEY ANTENNA ASSEMBLY

(a) Fold the right rear seatback assembly forward.

(b) Disconnect the connector.

Remove in this direction

(c) Using a clip remover, release the clip and remove the No. 3 interior electronic key antenna assembly, as shown in the illustration.

NOTICE:

Be careful when removing the No. 3 interior electronic key antenna assembly. If the No. 3 interior electronic key antenna assembly is dropped, replace it with a new one.