Theft Deterrent / Keyless Entry

Electronic Key Oscillator (for Outside Luggage Compartment)

~1min read
010203040505.54N·mlb·ft
Tightening torque found on this page

Components

COMPONENTS

ILLUSTRATION

*1

ELECTRONIC KEY ANTENNA

-

-

N*m (kgf*cm, lbf*in): Specified torque

-

-

Removal

REMOVAL

PROCEDURE

1. REMOVE REAR BUMPER ASSY

Click here

2. REMOVE ELECTRONIC KEY ANTENNA

Remove in this direction

(a) Disconnect the connector.

(b) Remove the nut.

(c) Release the guide to remove the electronic key antenna, as shown in the illustration.

NOTICE:

Be careful when removing the electronic key antenna. If the electronic key antenna is dropped, replace it with a new one.

Installation

INSTALLATION

PROCEDURE

1. INSTALL ELECTRONIC KEY ANTENNA

(a) Engage the guide to install the electronic key antenna, as shown in the illustration.

Install in this direction

NOTICE:

Be careful when installing the electronic key antenna. If the electronic key antenna is dropped, replace it with a new one.

(b) Install the nut.

Torque:

5.5 N·m {56 kgf·cm, 49 in·lbf}

(c) Connect the connector.

2. INSTALL REAR BUMPER ASSEMBLY

Click here