If the vehicle is stuck
If your vehicle is stuck in mud, sand or snow to the point that the wheels are spinning, proceed as follows:
1. Stop the engine. Move the selector lever to P (Multidrive) or N (manual transmission), and apply the parking brake.
2. Clear mud, snow or sand from around the front wheels.
3. Place tree branches, stones or other materials that improve traction under the front wheels.
4. Restart the engine.
5. Move the selector lever to D or R (Multidrive) or to 1 or R (manual transmission), and release the parking brake.
Then, very carefully, depress the accelerator pedal.

■ When the vehicle is difficult to free If your vehicle is stuck in mud, sand or snow to the point that the wheels are spinning, proceed as follows: Press
to turn off the TRC system.
A message is displayed on the multi-information display.
WARNING■ When attempting to free a stuck vehicle If you choose to free the vehicle by alternately shifting between forward and reverse, make sure there is enough clearance to avoid hitting a person, another vehicle or any other obstacle. The vehicle may also suddenly lurch forward or backward once it is freed. Exercise extreme caution.
■ When operating the selector lever Do not move the selector lever out of position while keeping your foot on the accelerator pedal.
The vehicle may accelerate suddenly and unexpectedly, which may cause a serious or fatal accident.
NOTE■ To prevent damage to the transmission and the vehicle in general
- Avoid spinning the front wheels and pressing the accelerator pedal more than necessary.
- If the vehicle remains stuck despite your efforts, it may need to be towed by another vehicle.