Toyota Camry Quiz
Introduction

Drive belt (2AZ−FE)(From July, 2003)

In this manual: Introduction
Introduction — 61Audio & visual system — 16Automatic transmission / trans — 19Transmission revolution (ATM) — 1Shift lock system (ATM) — 1Brake — 20Clutch — 10Communication system — 4Cooling — 15Cruise control — 3Drive shaft / propeller shaft — 9Emission control — 8Engine control system — 12Engine hood/door — 7Exhaust — 3Exterior/interior trim — 14Front suspension — 9Fuel — 12Heater & air conditioner — 16Ignition — 8Instrument panel/meter — 7Intake — 7Lighting — 11Lubrication — 16Manual transmission/transaxle — 13Parking brake — 10Power steering — 7Rear suspension — 10Seat — 12Service specifications — 26Sliding roof/convertible — 4Starting & charging — 11Starting system (2AZ−FE)(From July, 2003) — 1Starting system (1MZ−FE/3MZ−FE) — 1Steering column — 6Theft deterrent & door lock — 9Tire & wheel — 4Windshield/windowglass/mirror — 5Back window glass — 1Power window control system — 1Power mirror control system — 1Inner rear view mirror assy — 1Windshield glass — 1Wiring — 1
10steps
~60min
3/5difficulty
0204060801005238N·mlb·ft
Tightening torque found on this page
Done 0 of 10
REPLACEMENT
  1. REMOVE FRONT WHEEL RH
  2. REMOVE FRONT FENDER APRON SEAL RH
  3. REMOVE ENGINE COVER SUB−ASSY No.1
  4. REMOVE ENGINE MOVING CONTROL ROD W/BRACKET

a. Remove the 3 bolts and control rod.

Remove engine moving control rod W/bracket Remove engine moving control rod W/bracket
  1. REMOVE ENGINE MOUNTING STAY No.2 RH
  2. REMOVE ENGINE MOUNTING BRACKET No.2 RH
  3. REMOVE DRIVE BELT

a. Slowly turn the belt tensioner clockwise for more than 3 seconds, and remove the drive belt by using SST.

SST 09249−63010

Remove drive belt Remove drive belt 8. INSTALL DRIVE BELT

a. Slowly turn the belt tensioner clockwise for more than 3 seconds, and install the drive belt by using SST.

SST 09249−63010

Install drive belt Install drive belt
  1. INSTALL ENGINE MOUNTING BRACKET No.2 RH Torque: 52 N·m
  2. INSTALL ENGINE MOUNTING STAY No.2 RH Torque: 64 N·m
  3. INSTALL ENGINE MOVING CONTROL ROD W/BRACKET

a. Install the engine control rod with the 3 bolts.

Torque: 64 N·m Install engine moving control rod W/bracket Install engine moving control rod W/bracket 12. INSTALL FRONT WHEEL RH

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.