Toyota Land Cruiser Quiz
Body Electrical

Air inlet temperature sensor

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

INSPECTION

1. REMOVE FRONT SEATS

2. REMOVE REAR CONSOLE BOX

3. REMOVE FRONT CONSOLE BOX COVER

4. REMOVE LOWER CENTER CLUSTER FINISH PANEL

5. REMOVE FRONT DOOR SCUFF PLATES

6. REMOVE COWL SIDE TRIMS

7. REMOVE REAR DOOR SCUFF PATES

8. REMOVE CENTER PILLAR GARNISHES

9. REMOVE AIR INLET TEMPERATURE SENSOR

(a) Slide the floor carpet backward.

REMOVE AIR INLET TEMPERATURE SENSOR

(b) Disconnect the connector.

(c) Remove the screw and the air inlet temperature sensor.

10. INSPECT AIR INLET TEMPERATURE SENSOR CIRCUIT (DI-1342 )

11. INSTALL AIR INLET TEMPERATURE SENSOR

(a) Install the air inlet temperature sensor with the screw.

(b) Connect the connector.

(c) Install the floor carpet.

12. INSTALL CENTER PILLAR GARNISHES

13. INSTALL REAR DOOR SCUFF PLATES

14. INSTALL COWL SIDE TRIMS

15. INSTALL FRONT DOOR SCUFF PLATES

16. INSTALL REAR CONSOLE BOX

17. INSTALL FRONT SEATS

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.