Toyota Land Cruiser Quiz
Body Electrical

Air outlet servomotor

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

INSPECTION

1. REMOVE LOWER NO. 1 PANEL (BO-84 )

REMOVE LOWER NO. 1 PANEL

2. REMOVE AIR OUTLET SERVOMOTOR

(a) Disconnect the connector.

(b) Remove the 3 screws and the air outlet servomotor.

3. INSPECT AIR OUTLET SERVOMOTOR OPERATION

INSPECT AIR OUTLET SERVOMOTOR OPERATION

(a) Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 7.

(b) Connect the negative (-) lead from the battery to each terminal and check that the shaft rotates at each position, as shown in the illustration.

INSPECT AIR OUTLET SERVOMOTOR OPERATION

If operation is not as specified, replace the servomotor.

4. INSTALL AIR OUTLET SERVOMOTOR

(a) Install the air outlet servomotor with the 3 screws.

(b) Connect the connector.

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.