Toyota Land Cruiser Quiz
Body Electrical

Blower motor control relay

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

INSPECTION

1. REMOVE BLOWER MOTOR CONTROL RELAY

REMOVE BLOWER MOTOR CONTROL RELAY

(a) Disconnect the connectors.

(b) Remove the screw and the blower motor control relay.

2. INSPECT BLOWER MOTOR CONTROL RELAY

INSPECT BLOWER MOTOR CONTROL RELAY

Connect the connector to the blower motor control relay and inspect the wire harness side connector from the back side as shown in the illustration.

Test condition: Turn ignition switch to ON

INSPECT BLOWER MOTOR CONTROL RELAY

If circuit is not as specified, replace the relay.

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.