Toyota Land Cruiser Quiz
Body Electrical

Magnetic clutch relay

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

INSPECTION

INSPECTION

HINT: The magnetic clutch relay is built in the engine room junction block. Since the relay is constructed with a relay block that is in the junction block as a unit, it is impossible to disconnect the wire harness connecting with the relay block.

If the relay has a malfunction, replace it with the junction block assembly wire harness together.

1. REMOVE ENGINE ROOM J/B

REMOVE ENGINE ROOM J/B

2. INSPECT MAGNETIC CLUTCH RELAY CONTINUITY

INSPECT MAGNETIC CLUTCH RELAY CONTINUITY

If continuity is not as specified, replace the engine room J/B.

3. INSTALL ENGINE ROOM J/B

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.