Toyota Land Cruiser Quiz
Body Electrical

Disassembly

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
0102030405064N·mlb·ft
Tightening torque found on this page

1. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

3. REMOVE DEFROSTER NOZZLE

4. REMOVE CENTER BRACKET

5. REMOVE NO. 1 HEATER TO REGISTER DUCT

6. REMOVE INSTRUMENT PANEL WIRE HARNESS

7. REMOVE NO. 5 HEATER TO REGISTER DUCT

8. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

Remove the 3 nuts and the front passenger airbag assembly.

Torque: 6 N·m

CAUTION:

  • Do not store the front passenger airbag assembly with the airbag deployment side facing down.
  • Never disassemble the front passenger airbag assembly.

NOTICE: At the time of reassembly, please refer to the following items.

  • Make sure that the front passenger airbag assembly is installed with the specified torque.
  • If the front passenger airbag assembly has been dropped, or if there are cracks, dents or other defects in the case or the connector, replace the front passenger airbag assembly with a new one.
  • When installing the front passenger airbag assembly, take care that the wiring does not interfere with other parts and is not pinched between other parts.

9. REMOVE NO. 1 REGISTER

10. REMOVE NO. 4 REGISTER

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.