Toyota Land Cruiser Quiz
Body Electrical

Installation

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

1. INSTALL NO. 2 ROOF DRIP SIDE FINISH MOULDING CLIP

If the No. 2 roof drip side finish moulding clip comes off.

(a) Using a heat light, heat the body mounting surface to 40 - 60 C (104 - 140 F).

NOTICE: Do not heat the body excessively.

(b) Remove the adhesive tape and adhesive from the body. (c) Wipe off stains with cleaner.

(d) Using a heat light, heat the body and clip.

Body: 40 - 60 C (104 - 140 F) Clip: 20 - 30 C (68 - 86 F)

NOTICE: Do not heat the body and clip excessively.

(e) Install the clip.

2. INSTALL NO. 2 ROOF DRIP SIDE FINISH CENTER MOULDING

Install the No. 2 roof drip side finish center moulding to the roof drip side finish moulding.

3. INSTALL ROOF DRIP SIDE FINISH MOULDING

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.