Toyota Land Cruiser Quiz
Body Electrical

Installation

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
010203040505.44N·mlb·ft
Tightening torque found on this page

1. INSTALL REAR WIPER MOTOR AND LINK ASSEMBLY

INSTALL REAR WIPER MOTOR AND LINK ASSEMBLY

(a) Install the wiper motor and link assembly with 5 bolts.

Torque: 5,4 N·m

(b) Connect the connector.

2. INSTALL BACK DOOR GARNISH

3. INSTALL CENTER BACK DOOR GARNISH

4. INSTALL INSIDE HANDLE BEZEL

5. INSTALL ASSIST GRIP

Install the assist grip with the 2 screws, then install the 2 assist grip plugs.

6. INSTALL REAR WIPER ARM

(a) Install the grommet. (b) Operate the wiper once and turn the wiper switch OFF.

(c) Install the wiper arm and tighten the nut by hand.

INSTALL REAR WIPER ARM

(d) Adjust the installation position of the wiper arm to the position as shown in the illustration.

A: Approx. 38 +- 10 mm (1.50 +- 0.39 in.)

(e) Torque the nut.

Torque: 5,4 N·m

(f) Close the cover.

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.