Toyota Land Cruiser Quiz
Body Electrical

VSV for vapor pressure sensor

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
3steps
~18min
2/5difficulty
Done 0 of 3

COMPONENTS

COMPONENTS

INSPECTION

1. REMOVE VSV

2. INSPECT VSV

INSPECT VSV

(a) Inspect VSV for open circuit.

Using an ohmmeter, check that there is continuity between the terminals.

Resistance: 30 - 36 W at 20C (68F)

If there is no continuity, replace the VSV.

INSPECT VSV

(b) Inspect the VSV for ground.

Using an ohmmeter, check that there is no continuity between each terminal and the body.

If there is a continuity, replace the VSV.

INSPECT VSV

(c) Inspect the VSV operation.

  1. Check that air flows from the ports E to F.
    INSPECT VSV
  2. Apply the battery positive voltage across the terminals.
  3. Check that air flows from the ports E to F.

    If operation is not as specified, replace VSV.

3. REINSTALL VSV

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.