Toyota Land Cruiser Quiz
Body Electrical

VSV for canister closed valve (CCV)

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

COMPONENTS

COMPONENTS

INSPECTION

1. REMOVE VSV

2. INSPECT VSV FOR OPEN CIRCUIT

INSPECT VSV FOR OPEN CIRCUIT

Using an ohmmeter, check that there is a continuity between the terminals.

Resistance: 24 - 30 W at 20C (68F)

If there is no continuity, replace VSV.

3. INSPECT VSV FOR GROUND

INSPECT VSV FOR GROUND

Using an ohmmeter, check that there is no continuity between each terminal and the body.

If there is a continuity, replace VSV.

4. INSPECT VSV OPERATION

INSPECT VSV OPERATION

(a) Check that air flows from the ports A to B.

INSPECT VSV OPERATION

(b) Apply the battery positive voltage across the terminals.

(c) Check that air does not flow from the ports A to B.

If operation is not as specified, replace VSV.

5. REINSTALL VSV

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.