Lighting
Light control switch circuit
In this manual: Lighting
10steps
~60min
3/5difficulty
Done 0 of 10
Description

Inspection procedure
Ok: on is displayed on the intelligent tester screen.








Replace instrument panel junction block (main body ecu)
This circuit detects the state of the headlight dimmer switch.
Wiring diagram
Inspection procedure
- Read value of intelligent tester (main body ecu)
- Connect the intelligent tester to the dlc3.
- Turn the ignition switch on and press the intelligent tester main switch on.
- Select the items below in the data list, and read the displays on the intelligent tester.

Ok: on is displayed on the intelligent tester screen.


- Inspect headlight dimmer switch

- Remove the headlight dimmer switch.
- Measure the resistance of the switch.


- Check wire harness (main body ecu - dimmer switch and body ground)

- Disconnect the e12 headlight dimmer switch connector.
- Disconnect the ie and ij instrument panel junction block connectors.
- Disconnect the e15 and e17 main body ecu connectors.
- Measure the resistance of the wire harness side connectors.



Replace instrument panel junction block (main body ecu)
Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?