Audio / visual

Removal

15steps
~90min
4/5difficulty
Done 0 of 15

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE STEERING WHEEL NO. 2 LOWER COVER

3. REMOVE STEERING WHEEL NO. 3 LOWER COVER

4. REMOVE HONE BUTTON ASSEMBLY

5. REMOVE STEERING PAD SWITCH LH

REMOVE STEERING PAD SWITCH LH
  1. Disconnect the connector.
  2. Disconnect the connector of cruise control main switch.
  3. Remove the screw.
    REMOVE STEERING PAD SWITCH LH
  4. w/o Laser radar cruise control:
  5. Release the 2 pin fittings and remove the steering pad switch LH.
    REMOVE STEERING PAD SWITCH LH
  6. w/ Laser radar cruise control:
  7. Remove the clamp.
  8. w/ Laser radar cruise control:
  9. Release the 2 pin fittings and release the steering pad switch LH from steering wheel.
    REMOVE STEERING PAD SWITCH LH
  10. w/ Laser radar cruise control:
  11. Release the tab of steering pad switch cable from steering pad switch LH as shown in the illustration.
    REMOVE STEERING PAD SWITCH LH
  12. w/ Laser radar cruise control:
  13. Disengage the 2 claws as shown in the illustration and open the latch on the top of the connector.
    REMOVE STEERING PAD SWITCH LH
  14. w/ Laser radar cruise control:
  15. Pull out the connector while pinching the latch with fingers and disconnect the steering pad switch cable from the steering pad switch LH.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.