Lighting
Fog Light Relay
In this manual: Lighting
~1min read
Inspection INSPECTION PROCEDURE
1. INSPECT FOG LIGHT RELAY
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance between the terminals.
Standard:
Tester Connection | Specified Condition |
|---|---|
3-5 |
10 kΩ or higher |
3-5 |
Below 1 Ω (When battery voltage applied to terminals 1 and 2) |
If the result is not as specified, replace the fog light relay.
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?