Rear Combination Light Assembly

Components COMPONENTS ILLUSTRATION Disassembly DISASSEMBLY CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the LH and RH sides.
• The procedure described below is for the LH side.

PROCEDURE

1. REMOVE TAIL AND TURN SIGNAL LIGHT BULB

(a) Turn the tail and turn signal light socket with the tail and turn signal light bulb in the direction indicated by the arrow shown in the illustration to remove them.

(b) Remove the tail and turn signal light bulb from the tail and turn signal light socket.

2. REMOVE TAIL AND STOP LIGHT BULB

(a) Turn the tail and stop light socket with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration to remove them.

(b) Remove the tail and stop light bulb from the tail and stop light socket.

3. REMOVE BACK UP LIGHT BULB

(a) Turn the back up light socket with the back up light bulb in the direction indicated by the arrow shown in the illustration to remove them.

(b) Remove the back up light bulb from the back up light socket.

Reassembly REASSEMBLY CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the LH and RH sides.
• The procedure described below is for the LH side.

PROCEDURE

1. INSTALL BACK UP LIGHT BULB

(a) Install the back up light bulb to the back up light socket.

(b) Turn the back up light socket with back up light bulb in the direction indicated by the arrow shown in the illustration to install them.

2. INSTALL TAIL AND STOP LIGHT BULB

(a) Install the tail and stop light bulb to the tail and stop light socket.

(b) Turn the tail and stop light socket with tail and stop light bulb in the direction indicated by the arrow shown in the illustration to install them.

3. INSTALL TAIL AND TURN SIGNAL LIGHT BULB

(a) Install the tail and turn signal light bulb to the tail and turn signal light socket.

(b) Turn the tail and turn signal light socket with tail and turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them.

Removal REMOVAL CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the LH and RH sides.
• The procedure described below is for the LH side.

PROCEDURE

1. REMOVE REAR COMBINATION LIGHT ASSEMBLY

(a) Remove the 2 bolts.

(b) Disengage the 2 pins to separate the rear combination light assembly.

(c) Disengage the 2 guides to separate the wire harness.

(d) Disconnect the 3 connectors to remove the rear combination light assembly.

Installation INSTALLATION CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the LH and RH sides.
• The procedure described below is for the LH side.

PROCEDURE

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Connect the 3 connectors.

(b) Engage the 2 guides to install the wire harness.

(c) Engage the 2 pins to install the rear combination light assembly.

(d) Install the 2 bolts.

Torque:

4,1 N·m {42 kgf·cm, 36 in·lbf}