Lighting

Front Door Courtesy Switch

~1min read
Inspection INSPECTION PROCEDURE

1. INSPECT FRONT DOOR COURTESY SWITCH

(a) Check the resistance.

(1) Measure the resistance using an ohmmeter, and check the results in accordance with the value( s) in the table below.

Standard:

Tester Connection

Condition

Specified Condition

1-Switch body

ON (When shaft is pressed)

10 kΩ or higher

1-Switch body

OFF (When shaft is not pressed)

Below 1 Ω

If the result is not as specified, replace the front door courtesy light switch assembly.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.