Disassembly
1. REMOVE MAGNETIC CLUTCH ASSEMBLY
(a) Place the compressor and magnetic clutch in a vise. |
 |
(b) Using SST, hold the magnetic clutch hub.
SST: 09985-00270
(c) Remove the bolt, magnetic clutch hub, and magnetic clutch washers.
HINT:
There is no set number of magnetic clutch washers because they are used for adjustment.
(d) Using a snap ring expander, remove the snap ring and then remove the magnetic clutch rotor. NOTICE: Take care not to damage the seal cover of the bearing when removing the snap ring. |
 |
(e) Disconnect the connector. |
 |
(f) Disengage the clamp.
(g) Remove the screw and the bracket.
(h) Using a snap ring expander, remove the snap ring and magnetic clutch stator. NOTICE: Take care not to damage the seal cover of the bearing when removing the snap ring. |
 |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.