Installation

INSTALLATION PROCEDURE

1. INSTALL REAR DOOR COURTESY LIGHT SWITCH

(a) Using "TORX" socket wrench T30, install the rear door courtesy light switch with the "TORX" bolt. Torque: 8 N·m {82 kgf·cm, 71 in·lbf}

(b) Connect the rear door courtesy light switch connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

4. CONNECT REAR SEAT OUTER BELT ASSEMBLY

5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

6. INSTALL RECLINING REMOTE CONTROL BEZEL

7. INSTALL REAR SEAT ASSEMBLY LH (for LH Side)

8. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY (for LH Side)

9. INSTALL REAR SEAT OUTER TRACK BRACKET COVER (for LH Side)

10. INSTALL REAR SEAT INNER TRACK BRACKET COVER (for LH Side)

11. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

12. INSTALL REAR SEAT ASSEMBLY RH (for RH Side)

13. CONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (for RH Side)

14. INSTALL REAR SEAT OUTER TRACK BRACKET COVER (for RH Side)

15. INSTALL REAR SEAT INNER TRACK BRACKET COVER (for RH Side)

16. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)

17. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)

18. INSTALL REAR FLOOR FINISH PLATE

19. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY

20. INSTALL NO. 1 DECK BOARD

21. INSTALL DECK SIDE TRIM BOX LH

22. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

23. INSTALL DECK SIDE TRIM BOX RH

24. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

25. INSTALL DECK BOARD ASSEMBLY

26. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

27. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

28. INSTALL REAR DOOR SCUFF PLATE