Volkswagen Golf Quiz
General body repairs, interior

Removing and installing lumbar support adjustment

In this manual: General body repairs, interior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required
Removal pliers -3392-
Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.
Removal pliers -3392

Removing

  • Pull lumbar support adjusting lever -1- off shaft -2- using removing pliers -3392-.
Removal pliers -3392

Installing

Install in reverse order, but note the following:

  • Ensure that teeth on lumbar adjusting lever -1- align with shaft splines -2-.
  • Pull on lever to ensure it is firmly seated.
  • If adjusting lever is too loose following assembly, it must be renewed.

Specified torques

→ Chapter „Assembly overview - front backrest“
Removal pliers -3392

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.