Volkswagen Golf Quiz
General body repairs, interior

Removing and installing seat trim on tunnel side

In this manual: General body repairs, interior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.

Special tools and workshop equipment required

Removal wedge -3409
Removal wedge -3409

Removing

  • Remove front seat → Chapter.
  • Remove spreader rivets -arrows- of trim -1-.
  • To do this, press clamping pins in spreader rivets -arrows- inwards.
  • Lever off spreader rivets -1- using removal wedge -3409-.
Removing and installing seat trim on tunnel side
  • Remove trim -1- from mountings in seat frame.
Removing and installing seat trim on tunnel side

Installing

Install in reverse order, but note the following:

  • Insert spreader rivets -arrows- and press in clamping pins.

Specified torques

→ Chapter „Assembly overview - front seat“
Removing and installing seat trim on tunnel side

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.