Volkswagen Golf Quiz
General body repairs, interior

Removing and installing lumbar support adjustment switch -E176-/-E177-

In this manual: General body repairs, interior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
0102030405011N·mlb·ft
Tightening torque found on this page
Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.

Removing

  • Remove seat trim on sill side → Chapter.
  • Remove bolts -1-.
  • Remove switch -2-.

Installing

Installation is carried out in reverse order.

Specified torques
Removing and installing lumbar support adjustment switch -E176-/-E177-
Component Specified torque
Bolt -1- 1 N·m

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.