General body repairs, interior

Removing and installing massage control unit -J740-

~1min read

Special tools and workshop equipment required

Removal wedge -3409
Removal wedge -3409

Removing

  • If fitted, remove storage compartment → Chapter.
  • Unclip wiring harness -3- from retainer.
  • To do this, lever off cable retainer -4- using removal wedge -3409-.
  • Release connectors -2- and pull them off.
  • Release massage control unit -J740--1- from retaining tabs -5-.
  • Pull massage control unit -J740--1- out of mountings -arrows-.

Installing

Install in reverse order, but note the following:

  • Renew any damaged cable ties and clips.
  • Route wires in their original positions.

Specified torques

→ Chapter „Assembly overview - front seat“
→ Chapter „Assembly overview - seat pan“
Assembly overview - storage compartment → Anchor
Removing and installing massage control unit -J740-

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.