Onboard tool kit

All the tools supplied with the vehicle.

The contents depend on your vehicle's equipment:

- Temporary tyre repair kit.

- Spare wheel.

Accessing the tools

Most of the tools are stored in the boot, under the floor.

To access it:

Versions with 2-position boot floor:

► Open the boot.

► Place the movable boot floor in the raised position.

Versions with hinged boot mat (Plug-in Hybrid):

► Open the boot.

► Unfold the hinged boot mat by pulling on its handle until it is fully open.

With temporary tyre repair kit

► Unclip the two fasteners to open its cover.

With spare wheel

► Unclip the storage box by pulling upwards.

► Unclip the two fasteners to open its cover.

Tool details

1. 1
   Wheel chocks to immobilise the vehicle (depending on equipment)
2. 2
   Socket for anti-theft wheel bolt (located in the glovebox) (depending on equipment). Used to adapt the wheel brace to the special "anti-theft" bolts.
3. 3
   Towing eye and tool for opening the front and rear protective covers

For more information on Towing the vehicle and using the removable towing eye, refer to the corresponding section.

With temporary tyre repair kit

4. 12 V compressor with sealant cartridge and speed limitation sticker
   Used to temporarily repair the tyre and adjust tyre pressure.

For more information on the Temporary tyre repair kit, refer to the corresponding section.

With spare wheel

1. 1
   Wheel brace
   Used to remove the wheel fixing bolts.
2. 2
   Jack with integrated crank handle
   Used to lift the vehicle.
3. 3
   Wheel bolt cover removal tool (depending on equipment)
   Used to remove the bolt cap covers on alloy wheels.

For more information on the Spare wheel, refer to the corresponding section.

These tools are specific to the vehicle and may vary depending on equipment.

Do not use them for any other purpose.

The jack must only be used to replace a damaged tyre.

Do not use any jack other than the one supplied with the vehicle.

If the vehicle is not fitted with its original jack, contact a CITROËN dealer or a qualified workshop to obtain the one specified by the manufacturer.

The jack complies with European regulations, as defined in the Machinery Directive 2006/42/EC.

The jack requires no maintenance.