Water Pump

GENERAL INFORMATION

A. WATER PUMP.

B. O-RING

A. PUMP MOUNTING BOLTS.

B. TIMING BELT REAR COVER

Remove or disconnect:

Drain coolant from the cooling system to a level below the thermostat housing.

PROCEDURE.

1. Timing belt cover..

2. Timing belt..

3. Camshaft gear bolts and washers..

4. Camshaft gears..

5. Timing belt rear cover, Fig. Water pump removal..

6. Unscrew bolts A and remove the pump from the cylinder head, Fig. Removal.

water pump..

7. O-ring from the water pump..

Installation

PROCEDURE.

1. Install a new O-ring on the pump. Pre-apply Lubriplate sealant to the seal..

2. Install the pump onto the cylinder head, screw in the bolts. Tighten the water pump mounting bolts to a torque of 8 N·m..

3. Timing belt rear cover..

4. Install the gears onto the camshafts, fit the washers and screw in the bolts. Tighten the camshaft gear bolts to a torque of 45 N·m..

5. Timing belt..

6. Timing belt cover..

7. Add coolant to the cooling system..

8. Raise the vehicle.

9. Clutch cover plate.

10. Lower clutch housing mounting bolts to the cylinder block.