Body and Paint
Supplemental Restraint System (SRS) Airbags. Diagnosis and Testing
In this manual: Body and Paint
~53min read
DTC Chart: Restraints Control Module (RCM)
The diagnosis in this manual assumes a certain level of skill and knowledge of Ford-approved diagnostic procedures.
REFER TO: Diagnostic Methods (100-00 General Information, Description and Operation).
RCM Diagnostic Trouble Code Chart
| Trouble Code | Description | Action |
|---|---|---|
| B0001:11 | Driver Frontal Stage 1 Deployment Control: short to ground | Refer to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:12 | Driver Frontal Stage 1 Deployment Control: Short to Battery | Refer to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:13 | Driver Frontal Stage 1 Deployment Control: open circuit | Refer to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:1A | Driver Frontal Stage 1 Deployment Control: circuit resistance below threshold | Refer to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:2B | Driver Frontal Stage 1 Deployment Control: Signal Cross-Circuit | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:4A | Driver Frontal Stage 1 Deployment Control: incorrect component installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:11 | Driver Frontal Stage 2 Deployment Control: short to ground | Refer to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:12 | Driver Frontal Stage 2 Deployment Control: Short to Battery | Refer to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:13 | Driver Frontal Stage 2 Deployment Control: open circuit | Refer to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:1A | Driver Frontal Stage 2 Deployment Control: circuit resistance below threshold | Refer to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:2B | Driver Frontal Stage 2 Deployment Control: Signal Cross-Circuit | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:4A | Driver Frontal Stage 2 Deployment Control: incorrect component installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:11 | Driver Knee Airbag Deployment Control: short to ground | Refer to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:12 | Driver Knee Airbag Deployment Control: short to battery | Refer to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:13 | Driver Knee Airbag Deployment Control: open circuit | Refer to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:1A | Driver Knee Airbag Deployment Control: circuit resistance below threshold | Refer to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:2B | Driver Knee Airbag Deployment Control: Signal Cross-Circuit | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:4A | Driver Knee Airbag Deployment Control: incorrect component installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:11 | Tilt Steering Column Release Control: Short to Ground | Refer to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:12 | Tilt Steering Column Release Control: Short to Battery | Refer to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:13 | Tilt Steering Column Release Control: Open Circuit | Refer to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:1A | Tilt Steering Column Release Control: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:2B | Tilt Steering Column Release Control: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:4A | Tilt Steering Column Release Control: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:11 | Passenger Frontal Stage 1 Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:12 | Driver Side Front Stage 1 Deployment Control: Short to Battery | Refer to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:13 | Passenger Frontal Stage 1 Deployment Control: open circuit | Refer to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:1A | Passenger Frontal Stage 1 Deployment Control: circuit resistance below threshold | Refer to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:2B | Passenger Side Front Stage 1 Deployment Control: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:4A | Passenger Frontal Stage 1 Deployment Control: incorrect component installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:11 | Passenger Frontal Stage 2 Deployment Control: short to ground | Refer to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:12 | Passenger Side Front Stage 2 Deployment Control: Short to Battery | Refer to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:13 | Passenger Frontal Stage 2 Deployment Control: open circuit | Refer to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:1A | Front Passenger Stage 2 Deployment Control: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:2B | Passenger Side Front Stage 2 Deployment Control: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:4A | Passenger Front Deployment Control 2: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:11 | Passenger Knee Bolster Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:12 | Passenger Knee Airbag Deployment Control: Short to Battery | Refer to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:13 | Passenger Knee Air Bag Deployment Control: Open Circuit | Refer to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:1A | Passenger Knee Airbag Deployment Control: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:2B | Passenger Knee Bolster Deployment Control: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:4A | Passenger Knee Airbag Deployment Control: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:11 | Driver Seat Belt Sensor: Short to Ground | Refer to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:12 | Driver Seat Belt Sensor: Short to Battery | Refer to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:13 | Driver Seat Belt Sensor: Open Circuit | Refer to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:1D | Driver Seat Belt Sensor: Circuit Current Out of Range | Refer to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:2B | Driver Seat Belt Sensor: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:4A | Driver Seat Belt Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:11 | Passenger Seat Belt Sensor: Short to Ground | Refer to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:12 | Passenger Seat Belt Sensor: Short to Battery | Refer to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:13 | Passenger Seat Belt Sensor: Open Circuit | Refer to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:1D | Passenger Seat Belt Sensor: Circuit Current Out of Range | Refer to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:2B | Passenger Seat Belt Sensor: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:4A | Passenger Seat Belt Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0054:11 | Second Row Center Seat Belt Sensor: Short to Ground | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:12 | Second Row Center Seat Belt Sensor: Short to Battery | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:13 | Second Row Center Seat Belt Sensor: Open Circuit | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:1D | Second Row Center Seat Belt Sensor: Circuit Current Out of Range | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:2B | Second Row Center Seat Belt Sensor: Signal Cross Coupled | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:4A | Second Row Center Seat Belt Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0057:11 | Third Row Center Seat Belt Sensor: Short to Ground | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:12 | Third Row Center Seat Belt Sensor: Short to Battery | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:13 | Third Row Center Seat Belt Sensor: Open Circuit | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:1D | Third Row Center Seat Belt Sensor: Circuit Current Out of Range | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:2B | Third Row Center Seat Belt Sensor: Signal Cross Coupled | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:4A | Third Row Center Seat Belt Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:11 | Driver Seat Belt Pretensioner Deployment Control "A": Short to Ground | Refer to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:12 | Driver Seat Belt Pretensioner Deployment Control "A": Short to Battery | Refer to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:13 | Driver Seat Belt Pretensioner Deployment Control "A": Open Circuit | Refer to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:1A | Driver Seat Belt Pretensioner "A" Deployment Control: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:2B | Driver Seat Belt Pretensioner Deployment Control "A": Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:4A | Driver Seat Belt Pretensioner Deployment Control "A": Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:11 | Passenger Seat Belt Pretensioner Deployment Control "A": Short to Ground | Refer to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:12 | Passenger Seat Belt Pretensioner Deployment Control "A": Short to Battery | Refer to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:13 | Passenger Seat Belt Pretensioner "A" Deployment Control: Open Circuit | Refer to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:1A | Passenger Seat Belt Pretensioner Deployment Control "A": Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:2B | Passenger Seat Belt Pretensioner Deployment Control "A": Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:4A | Passenger Seatbelt Pretensioner "A" Deployment Control: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:11 | Driver Seat Belt Pretensioner "C" Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:12 | Driver Seat Belt Pretensioner Deployment Control "C": Short to Battery | Refer to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:13 | Driver Seat Belt Pretensioner Retractor Control "C": Open Circuit | Refer to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E: 1A | Driver Seat Belt Pretensioner Retractor Control "C": Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E: 2B | Driver Seat Belt Pretensioner Deployment Control "C": Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E: 4A | Driver Seat Belt Pretensioner Deployment Control "C": Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F:11 | Passenger Seat Belt Pretensioner "C" Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F:12 | Passenger Seat Belt Pretensioner Deployment Control "C": Short to Battery | Refer to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F: 13 | Passenger Seat Belt Pretensioner Deployment Control "C": Open Circuit | Refer to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F: 1A | Passenger Seat Belt Pretensioner Deployment Control "C": Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F: 2B | Passenger Seat Belt Pretensioner Deployment Control "C": Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F: 4A | Passenger Seatbelt Pretensioner "C" Deployment Control: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0080:11 | Driver Seat Belt Load Limiter Deployment Control: Short to Ground | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:12 | Driver Seat Belt Load Limiter Deployment Control: Short to Battery | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:13 | Driver Seat Belt Load Limiter Deployment Control: Open Circuit | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:1A | Driver Seat Belt Load Limiter Deployment Control: Circuit Resistance Below Threshold | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:2B | Driver Seat Belt Load Limiter Deployment Control: Signal Cross Coupled | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:4A | Driver Seat Belt Load Limiter Deployment Control: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:11 | Passenger Seat Belt Load Limiter Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:12 | Passenger Seat Belt Load Limiter Deployment Control: Short to Battery | Refer to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:13 | Passenger Seat Belt Load Limiter Deployment Control: Open Circuit | Refer to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:1A | Passenger Seat Belt Load Limiter Deployment Control: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:2B | Passenger Seat Belt Load Limiter Deployment Control: Cross-Communication Signal | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:4A | Passenger Seat Belt Load Limiter Deployment Control: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:09 | Occupant Classification System: Component Failure | Refer to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:4A | Occupant Classification System: Incorrect Component Installed | Refer to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:63 | Occupant Classification System: Circuit/Component Protection Time-out | Refer to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:64 | Occupant Classification System: Signal Plausibility Failure | Refer to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:68 | Occupant Classification System: Event Information | Refer to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:11 | Driver Seat Track Position Sensor: Short to Ground | Refer to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:12 | Driver Seat Track Position Sensor: Short to Battery | Refer to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:13 | Driver Seat Track Position Sensor: Open Circuit | Refer to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:1D | Driver Seat Track Position Sensor: Circuit Current Out of Range | Refer to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:2B | Driver Seat Track Position Sensor: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:4A | Driver Seat Track Position Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:11 | Passenger Seat Track Position Sensor: Short to Ground | Refer to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:12 | Passenger Seat Track Position Sensor: Short to Battery | Refer to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:13 | Passenger Seat Track Position Sensor: Open Circuit | Refer to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:1D | Passenger Seat Track Position Sensor: Circuit Current Out of Range | Refer to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00K5:2B | Passenger Seat Track Position Sensor: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00K5:4A | Passenger Seat Track Position Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00D5:12 | Passenger Air Bag Disable Indicator: Short to Battery | Refer to: Pinpoint Test - DTC: R (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00D5:14 | Passenger Airbag Disable Indicator: Short to Ground or Open Circuit | Refer to: Pinpoint Test - DTC: R (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00D5:4A | Passenger Airbag Disable Indicator: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1193:00 | Crash Event Storage Full and Locked: no subtype information | This diagnostic trouble code indicates that the vehicle has been involved in a collision. INSTALL a new RCM and impact sensors. REFER TO: Post-Deployment Inspection and Repair (SRS) (501-20B Supplemental Restraint System, General Procedures). |
| B11CF:11 | Passenger Frontal Airbag Canister Vent: Short to Ground | Refer to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:12 | Passenger Front Airbag Canister Vent: Short to Battery | Refer to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:13 | Passenger Frontal Airbag Canister Vent: Open Circuit | Refer to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:1A | Passenger Frontal Airbag Canister Vent: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:2B | Passenger Front Airbag Canister Vent: Signal Cross Connected | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:4A | Passenger Frontal Airbag Canister Vent: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11D8:12 | Restraint Event Notification: Short to Battery | Refer to: Pinpoint Test - DTC: T (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11D8:14 | Restraint Event Notification: Short to Ground or Open Circuit | Refer to: Pinpoint Test - DTC: T (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1202:12 | Passenger Airbag Enable Indicator: Short to Battery | REFER TO: Pinpoint Test - DTC: ZZ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1202:14 | Passenger Airbag Enable Indicator: Short to Ground or Open Circuit | REFER TO: Pinpoint Test - DTC: ZZ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1202:4A | Passenger Airbag Enable Indicator: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:11 | Driver Side Airbag Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:12 | Driver Side Airbag Deployment Control: Short to Battery | Refer to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:13 | Driver Side Airbag Deployment Control: Open Circuit | Refer to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:1A | Driver Side Airbag Deployment Monitoring: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:2B | Driver Side Airbag Deployment Control: Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:4A | Driver Side Airbag Deployment Monitoring: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:11 | Driver Side Curtain 1 Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:12 | Driver Side Curtain 1 Control: Short to Battery | Refer to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:13 | Driver Side Curtain 1 Deployment Control: Open Circuit | Refer to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:1A | Driver Side Curtain 1 Deployment Monitoring: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:2B | Driver Side Curtain 1 Deployment Control: Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:4A | Driver Side Curtain 1 Deployment Monitoring: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:11 | Passenger Side Airbag Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:12 | Passenger Side Airbag Control: Short to Battery | Refer to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:13 | Passenger Side Airbag Deployment Control: Open Circuit | Refer to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:1A | Passenger Side Airbag Deployment Monitoring: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:2B | Driver Side Air Bag Deployment Control: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:4A | Passenger Side Airbag Deployment Monitoring: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:11 | Passenger Side Curtain 1 Deployment Control: Short to Ground | Refer to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:12 | Passenger Side Curtain 1 Control: Short to Battery | Refer to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:13 | Passenger Side Curtain 1 Deployment Control: Open Circuit | Refer to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:1A | Passenger Side Curtain 1 Deployment Control: Circuit Resistance Below Threshold | Refer to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:2B | Passenger Side Curtain 1 Deployment Control: Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:4A | Passenger Side Curtain 1 Deployment Monitoring: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140K:11 | Driver Side Second Row Seat Belt Sensor: Short to Ground | REFER TO: Pinpoint Test - DTC: OO (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140K:12 | Driver Side Second Row Seat Belt Sensor: Short to Battery | REFER TO: Pinpoint Test - DTC: OO (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140K:13 | Driver Side Second Row Seat Belt Sensor: Open Circuit | REFER TO: Pinpoint Test - DTC: OO (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140K: 1D | Driver Side Second Row Seat Belt Sensor: Circuit Current Out of Range | REFER TO: Pinpoint Test - DTC: OO (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140K: 2B | Second Row Driver Side Seat Belt Sensor: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140K: 4A | Driver Side Second Row Seat Belt Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D: 11 | Passenger Side Second Row Seat Belt Sensor: Short to Ground | REFER TO: Pinpoint Test - DTC: PP (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D: 12 | Passenger Side Second Row Seat Belt Sensor: Short to Battery | REFER TO: Pinpoint Test - DTC: PP (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D: 13 | Passenger Side Second Row Seat Belt Sensor: Open Circuit | REFER TO: Pinpoint Test - DTC: PP (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D: 1D | Passenger Side Second Row Seat Belt Sensor: Circuit Current Out of Range | REFER TO: Pinpoint Test - DTC: PP (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D: 2B | Second Row Passenger Seat Belt Sensor: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D: 4A | Passenger Side Second Row Seat Belt Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140E:11 | Driver Side Third Row Seat Belt Sensor: Short to Ground | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:12 | Third Row Driver Side Seat Belt Sensor: Short to Battery | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:13 | Third row driver seat belt buckle switch: open circuit | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:1D | Third row driver seat belt buckle switch: circuit current out of range | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:2B | Third Row Driver Side Seat Belt Sensor: Signal Cross Coupled | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:4A | Third Row Driver Side Seat Belt Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140F:11 | Third row passenger seat belt buckle switch: short to ground | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:12 | Third Row Passenger Seat Belt Sensor: Short to Battery | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:13 | Third row passenger seat belt buckle switch: open circuit | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:1D | Third Row Passenger Seat Belt Sensor: Circuit Current Out of Range | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:2B | Third Row Passenger Seat Belt Sensor: Signal Cross Coupled | CHECK the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:4A | Third Row Passenger Seatbelt Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:11 | Driver Side Second Row Seat Belt Pretensioner Deployment Control: Short to Ground | REFER TO: Pinpoint Test - DTC: DDD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:12 | Driver Side Second Row Seat Belt Pretensioner Deployment Control: Short to Battery | REFER TO: Pinpoint Test - DTC: DDD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:13 | Driver Side Second Row Seat Belt Pretensioner Deployment Control: Open Circuit | REFER TO: Pinpoint Test - DTC: DDD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:1A | Driver Side Second Row Seat Belt Pretensioner Deployment Control: Circuit Resistance Below Threshold | REFER TO: Pinpoint Test - DTC: DDD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:2B | Driver Side Second Row Seat Belt Pretensioner Deployment Control: Cross-Communication Signal | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:4A | Driver Side Second Row Seat Belt Pretensioner Control: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:11 | Passenger Side Second Row Seat Belt Pretensioner Deployment Control: Short to Ground | REFER TO: Pinpoint Test - DTC: EEE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:12 | Passenger Side Second Row Seat Belt Pretensioner Deployment Control: Short to Battery | REFER TO: Pinpoint Test - DTC: EEE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:13 | Passenger Side Second Row Seat Belt Pretensioner Deployment Control: Open Circuit | REFER TO: Pinpoint Test - DTC: EEE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:1A | Passenger Side Second Row Seat Belt Pretensioner Deployment Control: Circuit Resistance Below Threshold | REFER TO: Pinpoint Test - DTC: EEE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:2B | Second Row Passenger Seat Belt Pretensioner Deployment Control: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:4A | Passenger Side Second Row Seat Belt Pretensioner Control: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:11 | Driver Front Airbag Sensor: Short to Ground | Refer to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:12 | Driver Front Airbag Sensor: Short to Battery | Refer to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:13 | Driver Front Airbag Sensor: Open Circuit | Refer to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:2B | Driver Front Airbag Sensor: Cross-Communication Signal | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:4A | Driver Front Airbag Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:81 | Driver Front Airbag Sensor: Incorrect Serial Data Received | First CHECK and REPAIR all other impact sensor diagnostic trouble codes (DTCs). If only DTC B1413:81 was retrieved, INSTALL a new left frontal impact sensor. REFER TO: Frontal Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1413:96 | Driver Front Airbag Sensor: Internal Component Failure | INSTALL a new LH front impact sensor. Refer to: Front Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1414:11 | Driver Side Supplemental Restraint System Sensor 1: Short to Ground | Refer to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:12 | Driver Side Supplemental Restraint System Sensor 1: Short to Battery | Refer to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:13 | Driver Side Supplemental Restraint System Sensor 1: Open Circuit | Refer to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:2B | Driver Side Supplemental Restraint System Sensor 1: Cross-Communication Signal | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:4A | Driver Side Supplemental Restraint System Sensor 1: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:81 | Driver Side Safety Sensor 1: Incorrect Serial Data Received | First CHECK and REPAIR all other impact sensor diagnostic trouble codes (DTCs). If only DTC B1414:81 was retrieved, INSTALL a new driver front door side impact sensor. REFER TO: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1414:96 | Driver Side Supplemental Restraint System Sensor 1: Internal Component Failure | INSTALL a new driver door side impact sensor. Refer to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1415:11 | Driver Side Supplemental Restraint System Sensor 2: Short to Ground | REFER TO: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:12 | Driver Side Supplemental Restraint System Sensor 2: Short to Battery | REFER TO: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:13 | Driver Side Supplemental Restraint System Sensor 2: Open Circuit | REFER TO: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:2B | Driver Side Secondary Restraint Sensor 2: Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:4A | Driver Side Restraint Sensor 2: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:81 | Driver Side Restraint Sensor 2: Incorrect Serial Data Received | First CHECK and REPAIR all other impact sensor diagnostic trouble codes (DTCs). If only DTC B1415:81 was retrieved, INSTALL a new left rear pillar side impact sensor. REFER TO: Rear Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1415:96 | Driver Side Secondary Restraint Sensor 2: Internal Component Failure | INSTALL a new LH rear pillar side impact sensor. Refer to: Rear Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1417:11 | Passenger Front Airbag Sensor: Short to Ground | Refer to: Pinpoint Test - DTC: BB (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:12 | Passenger Front Airbag Sensor: Short to Battery | Refer to: Pinpoint Test - DTC: BB (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:13 | Passenger Front Seat Sensor: Open Circuit | Refer to: Pinpoint Test - DTC: BB (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:2B | Passenger Front Airbag Sensor: Signal Cross Coupled | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:4A | Passenger Front Airbag Sensor: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:81 | Passenger Front Airbag Sensor: Incorrect Serial Data Received | First CHECK and REPAIR all other impact sensor diagnostic trouble codes (DTCs). If only DTC B1417:81 was retrieved, INSTALL a new right frontal impact sensor. REFER TO: Frontal Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1417:96 | Passenger Front Airbag Sensor: Internal Component Failure | INSTALL a new RH front impact sensor. Refer to: Front Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1418:11 | Passenger Side Secondary Restraint Sensor 1: Short to Ground | REFER TO: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:12 | Passenger Side Secondary Restraint Sensor 1: Short to Battery | REFER TO: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:13 | Passenger Side Secondary Restraint Sensor 1: Open Circuit | REFER TO: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:2B | Passenger Side Secondary Restraint Sensor 1: Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:4A | Passenger Side Secondary Restraint Sensor 1: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:81 | Passenger Side Restraint Sensor 1: Incorrect Serial Data Received | First CHECK and REPAIR all other impact sensor diagnostic trouble codes (DTCs). If only DTC B1418:81 was retrieved, INSTALL a new passenger door side impact sensor. REFER TO: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1418:96 | Passenger Side Secondary Restraint Sensor 1: Internal Component Failure | INSTALL a new passenger door side impact sensor. Refer to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1419:11 | Passenger Side Secondary Restraint Sensor 2: Short to Ground | Refer to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:12 | Passenger Side Supplemental Restraint Sensor 2: Short to Battery | Refer to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:13 | Passenger Side Secondary Restraint Sensor 2: Open Circuit | Refer to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:2B | Passenger Side Secondary Restraint Sensor 2: Signal Cross-Coupling | REFER TO: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:4A | Passenger Side Secondary Restraint Sensor 2: Incorrect Component Installed | REFER TO: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:81 | Passenger Side Airbag Sensor 2: Incorrect Serial Data Received | FIRST, CHECK and REPAIR all other impact sensor diagnostic trouble codes (DTCs). If only DTC B1419:81 was retrieved, INSTALL a new side impact sensor in the right rear pillar. REFER TO: Rear Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1419:96 | Passenger Side Secondary Restraint Sensor 2: Internal Component Failure | INSTALL a new RH rear pillar side impact sensor. Refer to: Rear Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B142D:00 | Pyrotechnic End-of-Life Activation Performed: No Subtype Information | INSTALL a new RCM and PERFORM PMI. Use Actuator Data when performing PMI for this DTC. Refer to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B1492:68 | Fuel Cut-Off Event: Event Information |
|
| C0061:68 | Lateral Acceleration Sensor: Event Information | REFER TO: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| C0062:68 | Longitudinal Acceleration Sensor: Event Information | REFER TO: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| C0063:68 | Yaw Rate Sensor: Event Information | REFER TO: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| C0064:68 | Rotational Speed Sensor: Event Information | REFER TO: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| C0065:68 | Vertical Acceleration Sensor: Event Information | REFER TO: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0028:88 | Vehicle Communication Bus A: Bus Off | INSTALL a new RCM. Use the wiring diagram data when performing PMI for this DTC. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U0100:00 | Lost Communication with ECM/PCM A: No Sub Type Information | REFER TO: Pinpoint Test - DTC: SS (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0112:00 | Lost communication with Battery Energy Control Module "B": no subtype information | REFER TO: Pinpoint Test - DTC: TT (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | REFER TO: Pinpoint Test - DTC: FF (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0146:00 | Lost communication with gateway "A": no sub-type information | REFER TO: Pinpoint Test - DTC: AAA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0154:00 | Lost Communication with Occupant Classification System Module: No Sub Type Information | REFER TO: Pinpoint Test - DTC: GG (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0253:00 | Lost Communication with Auxiliary Protocol Interface Module: No Sub Type Information | REFER TO: Pinpoint Test - DTC: HH (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0401:00 | Invalid Data Received from ECM/PCM A: No Sub-Type Information | CHECK for additional RCM and PCM diagnostic trouble codes (DTCs). CHECK and REPAIR any DTCs found. For RCM DTC information, refer to the RCM DTC Chart in the RCM. To diagnose PCM DTCs, refer to the applicable section in Group 303 for procedure information. If the DTC is not listed in the service manual, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual. |
| U0401:81 | Incorrect data received from ECM/PCM A: incorrect serial data received | CHECK for additional RCM and PCM diagnostic trouble codes (DTCs). CHECK and REPAIR any DTCs found. For RCM DTC information, refer to the RCM DTC Chart in the RCM. To diagnose PCM DTCs, refer to the applicable section in Group 303 for procedure information. If the DTC is not listed in the service manual, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual. |
| U0413:00 | Invalid data received from Battery Energy Control Module "B": no subtype information | CHECK for additional RCM and BECMB diagnostic trouble codes (DTCs). CHECK and REPAIR any DTCs found. For RCM DTC information, refer to the RCM DTC Chart in the RCM. To diagnose BECMB DTCs, REFER TO the BECMB DTC Chart in the BECMB. |
| U0413:56 | Invalid data received from Battery Energy Control Module "B": incorrect/incompatible configuration | REFER TO: Pinpoint Test - DTC: YY (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0413:92 | Invalid data received from Battery Energy Control Module "B": incorrect/incompatible configuration | This DTC indicates a BECMB malfunction. PERFORM the BECMB self-test. CHECK and REPAIR any BECMB DTCs. REFER TO the BECMB DTC Chart in the BECMB. |
| U0422:00 | Incorrect Data Received from Body Control Module: No Sub Type Information | CHECK for additional RCM and BCM diagnostic trouble codes (DTCs). CHECK and REPAIR any DTCs found. For RCM DTC information, refer to the RCM DTC Chart in the RCM. For BCM DTCs: REFER TO: Body Control Module (BCM) (419-10 Multifunction Electronic Modules, Diagnosis and Testing). |
| U0422:81 | Invalid Data Received from Body Control Module: Incorrect Serial Data Received | CHECK for additional RCM and BCM diagnostic trouble codes (DTCs). CHECK and REPAIR any DTCs found. For RCM DTC information, refer to the RCM DTC Chart in the RCM. For BCM DTCs: REFER TO: Body Control Module (BCM) (419-10 Multifunction Electronic Modules, Diagnosis and Testing). |
| U0455:81 | Invalid data received from Occupant Classification Sensor Module: incorrect serial data received | CHECK for additional RCM and OCSM diagnostic trouble codes (DTCs). CHECK and REPAIR any DTCs found. For RCM DTC information, refer to the RCM DTC Chart in the RCM. For OCSM DTC information, REFER TO the OCSM DTC Chart in the OCSM. |
| U0554:00 | Invalid Data Received from Auxiliary Protocol Interface Module: No Sub Type Information | CHECK for additional RCM and APIM diagnostic trouble codes (DTCs). For RCM DTCs, RETURN to the start of this chart. For APIM DTCs, refer to the applicable section in Group 415. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle history for recent service actions involving this module. This DTC is set due to incomplete or incorrect PMI procedures. If service has recently been performed on this module, REPEAT the PMI procedure in accordance with the diagnostic scan tool instructions using factory data. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | PERFORM the PMI using the factory data. RETRIEVE the RCM diagnostic trouble codes (DTCs). If RCM DTC U2101:00 is retrieved on demand, INSTALL a new RCM. Use the factory data when performing the PMI for this DTC. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | INSTALL a new RCM and PERFORM the PMI using the diagnostic scanner. Use the factory data when performing the PMI for this DTC. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U2300:55 | Central configuration: not configured | Refer to: Pinpoint Test - DTC: II (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U2300:64 | Central configuration: signal integrity failure | Refer to: Pinpoint Test - DTC: II (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U3000:04 | Control Module: Internal System Failure | INSTALL a new RCM. Using the diagnostic scanner, PERFORM the PMI using the factory data. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:46 | Control module: calibration / parameter memory failure | INSTALL a new RCM. Using the diagnostic scanner, PERFORM the PMI using the factory data. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new RCM. Using the diagnostic scan tool, PERFORM the RCM PMI. If DTC U2200:00 is also present, use factory data when performing PMI for this DTC. REFER TO: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | REFER TO: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | REFER TO: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
DTC Chart: Occupant Classification Sensing Module (OCSM)
The diagnosis in this manual assumes a certain level of skill and knowledge of Ford-approved diagnostic procedures.
REFER TO: Diagnostic Methods (100-00 General Information, Description and Operation).
OCSM Diagnostic Trouble Code Chart
| Trouble Code | Description | Action |
|---|---|---|
| B0061:11 | Passenger Seat Belt Tension Sensor: short to ground | REFER TO: Pinpoint Test - DTC: KK (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:12 | Passenger Seat Belt Tension Sensor: short to battery | REFER TO: Pinpoint Test - DTC: KK (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:13 | Passenger Seat Belt Tension Sensor: open circuit | REFER TO: Pinpoint Test - DTC: KK (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:64 | Passenger Seat Belt Tension Sensor: signal implausible | REFER TO: Pinpoint Test - DTC: KK (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C0:11 | Passenger Seat Occupant Classification Sensor "A": Short to Ground | INSTALL a new OCS sensor. REFER TO Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:12 | Passenger Occupant Classification Sensor "A": short to battery | INSTALL a new OCS sensor. REFER TO Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:16 | Passenger Seat Occupant Classification Sensor "A": Circuit Voltage Below Threshold | INSTALL a new OCS sensor. REFER TO Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:49 | Front passenger seat occupant classification sensor "A": internal electronic failure | INSTALL a new OCS sensor. REFER TO Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:7B | Passenger Seat Occupant Classification Sensor "A": Low Fluid Level |
|
| B00C2:11 | Passenger Seat Occupant Classification Sensor "C": short to ground | REFER TO: Pinpoint Test - DTC: LL (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C2:12 | Passenger Seat Occupant Classification Sensor "C": Short to Battery | REFER TO: Pinpoint Test - DTC: LL (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1193:00 | Crash Event Storage Full and Locked: no subtype information | CLEAR the OCSM DTCs and REPEAT the self-test. If DTC B1193:00 returns, INSTALL a new OCS sensor. INSTALL a new OCS sensor. REFER TO: Occupant Classification Sensor (OCS) (501-20B Supplemental Restraint System, Removal and Installation). |
| U0100:00 | Lost Communication with ECM/PCM A: No Sub Type Information | REFER TO: Pinpoint Test - DTC: SS (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0151:00 | Lost communication with restraints control module: no subtype information | REFER TO: Pinpoint Test - DTC: NN (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0401:00 | Incorrect Data Received from ECM/PCM 'A': No Sub Type Information | PERFORM the PCM self-test. REFER TO the applicable section of the service manual. See the applicable section in Group 303. |
| U3000:41 | Control Module: General Checksum Failure | INSTALL a new OCS sensor. REFER TO Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:42 | Control Module: General Memory Failure | INSTALL a new OCS sensor. REFER TO Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:46 | Control module: calibration / parameter memory failure | INSTALL a new OCS sensor. REFER TO Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:54 | Control Module: Calibration Missing | Using the diagnostic scan tool, PERFORM an OCS reset. FOLLOW all diagnostic scan tool instructions. If the OCS reset was not successful, CHECK the OCS installation. ENSURE that the pressure sensor hose is routed correctly and CORRECT the installation if necessary. REPEAT the self-test. If DTC U3000:54 is still present, INSTALL a new OCS sensor. REFER TO: Occupant Classification Sensor (OCS) (501-20B Supplemental Restraint System, Removal and Installation). |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | REFER TO: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | REFER TO: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
DTC Chart: High Power Battery Energy Control Module [BECM-B]
The diagnosis in this manual assumes a certain level of skill and knowledge of Ford-approved diagnostic procedures.
REFER TO: Diagnostic Methods (100-00 General Information, Description and Operation).
BECM-B DTC Chart
| Trouble Code | Description | Action |
|---|---|---|
| B00A0:11 | Occupant Classification System: short to ground | REFER TO: Pinpoint Test - DTC: UU (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:12 | Occupant Classification System: short to battery | REFER TO: Pinpoint Test - DTC: UU (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1123:11 | Ignition Relay: Open Circuit | REFER TO: Pinpoint Test - DTC: UU (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1123:12 | Ignition Relay: Circuit Voltage Out of Range | REFER TO: Pinpoint Test - DTC: UU (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1142:62 | Ignition Status 1: signal comparison failure | REFER TO: Pinpoint Test - DTC: VV (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B13BF:12 | Start/Run Input: Short to Battery | REFER TO: Pinpoint Test - DTC: VV (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0100:87 | Lost Communication with ECM/PCM A: No Sub Type Information | REFER TO: Pinpoint Test - DTC: WW (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0140:87 | Lost Communication with Body Control Module: No Sub Type Information | REFER TO: Pinpoint Test - DTC: XX (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U1000:00 | Solid State Driver Protection Active - Driver Disabled | FIRST, CHECK any other BECMB diagnostic trouble codes (DTCs). CLEAR the diagnostic trouble codes (DTCs). REPEAT the self-test. If DTC U1000:00 returns, INSTALL a new BECMB. REFER TO: Battery Energy Control Module B (BECMB) (501-20B Supplemental Restraint System, Removal and Installation). |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle history for recent service actions involving this module. This DTC is set due to incomplete or incorrect PMI procedures. If service has recently been performed on this module, REPEAT the PMI procedure in accordance with the diagnostic scan tool instructions using factory data. |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new BECMB. REFER TO: Battery Energy Control Module B (BECMB) (501-20B Supplemental Restraint System, Removal and Installation). |
Symptom Chart
Symptom Chart: Supplemental Restraint System
The diagnosis in this manual assumes a certain level of skill and knowledge of Ford-approved diagnostic procedures.
REFER TO: Diagnostic Methods (100-00 General Information, Description and Operation).
Symptom Chart
| Condition | Possible Sources | Action |
|---|---|---|
| Module Does Not Respond to Diagnostic Scan Tool |
|
|
| The chime sounds for 60 seconds after the ignition is turned on. |
|
|
| Airbag Indicator Flashes |
|
|
| Airbag Indicator Stays On |
|
|
Test yourself
A quick Ford Fusion quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?