Maintenance
Bulb Replacement
In this manual: Maintenance
16steps
~96min
5/5difficulty
Done 0 of 16
Use the correct bulb.
Install in the reverse order, unless otherwise specified.
Headlamp

- High beam headlamp.
- Low beam headlamp.
Low Beam Headlamp
- Carefully remove the cover.
- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise and remove it.
High Beam
- Carefully remove the cover.
- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise and remove it.
Front Halogen Fog Lamp

- Remove the fog lamp cover using a flat-blade screwdriver.
- Remove the three retainers using a screwdriver.
- Remove the bulb.

- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise and remove it.
- Install a new bulb in the reverse order.
LED Lamps
LED bulbs are not serviceable. Have your vehicle checked as soon as possible.
The following lamps may be LED:
- Front side marker lamps.
- Front turn signal lamps.
- Daytime running lamps.
- Side turn signal lamps.
- Center high-mounted stop lamp.
- Rear turn signal lamps.
- Brake and tail lamps.
- Front fog lamps.
Back-up lamps.
1. Carefully remove the plastic clips retaining the inner cover.

2. Turn the bulb holder counterclockwise and remove it.
- Press in on the bulb, and turn the bulb counterclockwise to remove it.
License plate lamp

- Use a suitable tool, such as a screwdriver, to carefully remove the lamp.
- Remove the bulb.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
Test yourself
A quick Ford Fusion quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
