Engine Oil Pressure Sensor. Removal and Installation

Materials

Removal

1. 1
   Position the vehicle in NEUTRAL on the lift.
   Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
2. 2
   Remove the retainers and the lower engine splash shield.

   

3. 3
   Remove and discard the engine oil filter.

   

4. 4
   Disconnect the engine oil pressure switch electrical connector.

   

5. 5
   Remove and discard the engine oil pressure sensor.

   

Installation

1. 1
   Install a new oil pressure sensor.
   Torque: 159 lb-in (18 N·m)

   

2. 2
   Connect the engine oil pressure switch electrical connector.

   

3. 3
   Lubricate the O-ring and install a new engine oil filter.
   Material: Engine Oil - SAE 5W-20 - Synthetic Engine Oil / XO-5W20-Q1SP (WSS-M2C945-B1)
   Torque: 128 lb-in (14.5 N·m)

   

4. 4
   Install the engine shield and clips.

   

5. 5
   Check and adjust the engine oil level.
   Material: Engine Oil - SAE 5W-20 - Synthetic Engine Oil / XO-5W20-Q1SP (WSS-M2C945-B1)