Wheels and Tyres
Fitting the wheel brace
In this manual: Wheels and Tyres
7steps
~42min
2/5difficulty
Done 0 of 7
Note: Make sure the wheel brace is fully extended.
Removing the wheel trim- Loosen the wheel nuts.
- Raise the vehicle just enough to lift the tyre off the ground.
- Remove the wheel nuts and the wheel trim.
DANGER
Park the vehicle in a position where it does not obstruct or endanger yourself or traffic.Park the vehicle so that it does not obstruct traffic or put you at risk, and place the warning triangle.
Make sure the vehicle is on a level, firm surface with the front wheels pointing straight ahead.Switch off the ignition and apply the parking brake.
If the vehicle has a manual gearbox, select first or reverse gear. If the vehicle has an automatic gearbox, put the selector in Park (P).Make sure all passengers have exited the vehicle.
Chock the diagonally opposite wheel with a suitable wheel chock or wedge.Never place any part of your body under a vehicle supported by a jack.
Make sure the jack is vertical at the lifting point and that the base is resting on level ground.Note: The spare wheel is located under the floor cover in the luggage compartment.
Note: Do not place alloy wheels face down on the ground as this will damage the paint.- Fit the wheel lock nut key.
- Loosen the wheel nuts.
- Raise the vehicle just enough to lift the tyre off the ground.
- Remove the wheel nuts and the wheel.
Test yourself
A quick Ford Ka quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?