Hyundai Accent Quiz
Lubrication System

Inspection

In this manual: Lubrication System
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Check the oil pan for cracks or damage and replace it if necessary.
2. Check the oil filter for cracks or damage and replace it if necessary.
3. Check the front cover for wear or damage at the contact surfaces with the oil pump rotors and replace it if necessary.
4. Check the oil pump rotor teeth for wear or damage.

5. Щупом измерьте зазор между шестерней масляного насоса и гнездом в крышке.

5. Using a feeler gauge, measure the clearance between the oil pump outer rotor and the housing bore in the cover.
Maximum outer rotor clearance: 0.12–0.18 mm

6. Щупом измерьте зазор между зубьями шестерен масляного насоса.

6. Using a feeler gauge, measure the tooth tip clearance of the oil pump gears.
Maximum allowable oil pump gear tooth clearance: 0.001–0.003 mm

7. Металлической линейкой и щупом измерьте боковой зазор шестерен масляного насоса.

7. Using a metal straightedge and feeler gauge, measure the side clearance of the oil pump gears.

Maximum allowable oil pump rotor side clearance: 0.04–0.085 mm

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.