Cluster Ionizer Repair Procedures

Inspection

1. Press the MODE switch more than 4 times within 2 seconds while holding the OFF switch.

   Display	Description of Malfunction
   00	Normal
   51	Cluster Ionizer Generator Malfunction

   
   * For the diagnostic procedure, refer to the DTC Chart.

Diagnosis Using GDS

1. 1
   Heating, ventilation and air conditioning faults can be quickly diagnosed with the Global Diagnostic System (GDS). The diagnostic system (GDS) provides the following information. (1) Self-diagnosis: DTC check and display. (2) Current Data: Checks the status of system input/output data. (3) Actuation Test: Checks the operating status of the system. (4) Special Functions: Other controls such as system options and zero point adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select the Current Data menu to check the current status of the input/output data. The input/output data for the sensors related to the cluster ionizer can be checked.

   

Replacement

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the center airbag panel. (Refer to Body - "Center Airbag Panel")
3. 3
   Disconnect the connector (A).
4. 4
   Loosen the mounting screw and remove the cluster ionizer (B).

   

5. 5
   Install in the reverse order of removal.