Dual Clutch Transmission Operation

The Dual Clutch Transmission (DCT) has seven forward gears and one reverse gear. The individual gears are selected automatically when the shift lever is in the D (Drive) position.

• The Dual Clutch Transmission (DCT) can be considered an automatic version of a manual transmission. It gives the feel of driving a manual transmission while providing the ease of a fully automatic transmission.
• When D (Drive) is selected, the transmission shifts gears automatically, similar to a conventional automatic transmission. Unlike a conventional automatic transmission, gear changes can sometimes be felt and heard as the clutches engage and the gears are selected.
• The Dual Clutch Transmission (DCT) uses a dry-type dual clutch mechanism, which improves acceleration performance and fuel efficiency while driving. However, it differs from a conventional automatic transmission in that it does not include a torque converter. Instead, gear changes are controlled by clutch slip, especially at lower speeds. As a result, shifts may sometimes be more noticeable, and a slight vibration may be felt since the transmission input shaft speed matches the engine speed. This is a normal condition for a dual clutch transmission.
• A dry-type clutch transmits torque more directly and provides a direct drive feel, which may differ from a conventional automatic transmission. This may be more noticeable when starting from a stop or driving at low speeds with frequent stops.
• When accelerating rapidly from a low vehicle speed, engine speed may rise suddenly due to clutch slip while the dual clutch transmission selects the appropriate gear. This is a normal condition.
• When accelerating from a stop on a slope, press the accelerator pedal smoothly and gradually to avoid a feeling of shudder or jerking.
• When driving at low vehicle speed, if you release the accelerator pedal quickly, you may feel engine braking before the transmission shifts gears. This engine braking feel is similar to driving a manual transmission at low speed.
• When driving downhill, you can move the shift lever to the Manual shift mode position and downshift to control vehicle speed without excessive use of the brake pedal.
• Clicking sounds may be heard when the engine is started and stopped while the system performs a self-check. This is a normal sound for a dual clutch transmission.
• During the first 1000 miles, you may notice that the vehicle does not move smoothly when accelerating at low speed. During this break-in period, the shift quality and performance of your new vehicle are continuously being optimized.

WARNING

To reduce the risk of serious injury or death:

• ALWAYS check the area around the vehicle for people, especially children, before shifting into D (Drive) or R (Reverse).
• Before leaving the driver's seat, always make sure the shift lever is in P (Park), then apply the parking brake and turn the ignition switch to the LOCK/OFF position. Unexpected and sudden vehicle movement may occur if these precautions are not followed.
• Do not use aggressive engine braking (downshifting from a higher gear to a lower gear) on slippery roads. This may cause the tires to lose traction and result in an accident.

NOTICE

• Always come to a complete stop before shifting into D (Drive) or R (Reverse).
• Do not shift into N (Neutral) while the vehicle is in motion.

WARNING

If the transaxle cannot shift into Drive or Reverse, the D or R position indicator on the cluster will flash. Have the system checked by an authorized HYUNDAI dealer.