Hyundai Elantra CN7 Quiz

Power Steering Pump - Removal

In this manual: Power Steering Pump - Removal
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read


POWER STEERING PUMP - COMPONENTS

REMOVAL 1. Disconnect the pressure hose from the power steering pump.

2. Отсоедините впускной шланг от соединительного фланца на насосе гидроусилителя

2. Disconnect the suction hose from the connector flange on the power steering pump and drain the fluid into a suitable container.

3. Loosen the power steering pump mounting bolts before removing the pump drive belt.

4. Ослабьте болт регулировки натяжения ремня привода насоса.

4. Loosen the pump drive belt tension adjusting bolt.

5. Снимите ремень привода насоса со шкива насоса гидроусилителя.

5. Remove the pump drive belt from the power steering pump pulley.

6. Fully remove the power steering pump mounting bolts and the pump drive belt tension adjusting bolt.

7. Снимите насос гидроусилителя рулевого управления в сборе.

7. Remove the power steering pump assembly.

8. Снимите кронштейн крепления насоса гидроусилителя рулевого управления.

8. Remove the power steering pump mounting bracket.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.