Hyundai Elantra CN7 Quiz

Power Steering Pump Drive Belt Tension Inspection

In this manual: Power Steering Pump Drive Belt Tension Inspection
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
1. Нажмите на клиновой ремень привода насоса гидроусилителя рулевого управления

1. Press the power steering pump drive V-belt with a force of 98 N at the point shown in the illustration, and check that the belt deflection is within the standard value.

Belt deflection (standard value): 6 - 9 mm

2. Если прогиб ремня не соответствует номинальному значению, то отрегулируйте

2. If the belt deflection does not meet the standard value, adjust the belt tension as follows:

a) Loosen the belt tension adjusting bolt on the power steering pump.

б) Установите рычаг напротив насоса гидроусилителя рулевого управления и, перемещая

b) Position a lever against the power steering pump and, moving the pump, adjust the belt deflection to the standard value.

c) Tighten the belt tension adjusting bolt on the power steering pump.

d) Check the belt deflection and repeat the adjustment procedure if necessary.

Check the belt deflection after rotating the power steering pump pulley one or more turns in the normal direction of rotation.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.