Hyundai Elantra CN7 Quiz

General Information

In this manual: General Information
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
010203040501.31N·mlb·ft
Tightening torque found on this page

SPECIFICATIONS

POWER STEERING GEAR

Steering Shaft and Joint Type Universal joint, steering column with tilt adjustment mechanism and pop-up weight (impact absorbing device)
Steering Gear Type Steering Gear Stroke Power Steering Oil Pump Flow Rate at Steering Wheel Turn Rack and pinion 144 ± 1 mm (3.15 turns lock to lock) Vane pump maximum 9.6 mL/rev

SPECIFICATIONS FOR ADJUSTMENTS AND INSPECTION

POWER STEERING GEAR

Steering Wheel Play 0 - 30 mm
Wheel Turning Angle
Inside Wheel Outside Wheel Difference in Wheel Angles Between Left and Right Turns 40°1′ ± 2° 33°45′ 2° or less
Steering Effort at Steering Wheel with Vehicle Stationary 29 N or less
Power Steering Oil Pump Drive Belt Deflection (when pressed with 98 N force) 6 - 9 mm
Relief Valve Opening Pressure 8300 – 8800 kPa
Steering Gear Pinion Total Rotating Torque (Steering Gear Pinion Shaft Preload) 0,6 - 1.3 N·m
Tie Rod End Ball Joint Rotating Torque 2 - 5 N·m

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.