Hyundai Elantra CN7 Quiz

Timing Belt Drive - Removal

In this manual: Timing Belt Drive - Removal
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read


TIMING BELT - COMPONENTS

REMOVAL

1. Loosen the crankshaft pulley bolts and the coolant pump pulley bolts.

2. Loosen the generator mounting bolt.

3. Снимите шкив насоса охлаждающей жидкости и ремень привода генератора.

3. Remove the coolant pump pulley and the generator drive belt.

4. Remove the crankshaft pulley.

5. Снимите крышку ремня привода ГРМ.

5. Remove the timing belt cover.

6. Снимите ролик натяжителя ремня привода ГРМ.

6. Remove the timing belt tensioner pulley.

If the timing belt is to be reused, mark the direction of rotation with chalk on the back (non-working) side of the belt (or the position of the crankshaft pulley), so that the direction of rotation is not confused when installing the belt.

7. Снимите ремень привода ГРМ.

7. Remove the timing belt.

8. Remove the idler pulley.

9. Remove the camshaft sprocket.

Be careful not to damage the cylinder head with the wrench when removing the camshaft sprocket.

10. Снимите звездочку коленчатого вала с коленчатого вала.

10. Remove the crankshaft sprocket from the crankshaft.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.