Headlamp

1. Open the hood.
2. Remove the cover by turning it counterclockwise.
3. Disconnect the bulb socket connector.
4. Disconnect the headlamp bulb clip by pressing the end and pulling it upward.
5. Remove the bulb from the headlamp assembly.
6. Install the new bulb and disconnect the bulb clip from the headlamp, aligning the clip with the groove on the bulb.
7. Connect the bulb connector.
8. Install the cover by turning it clockwise.

Turn Signal

1. Remove the socket from the assembly by turning it counterclockwise until the socket tabs are aligned with the assembly housing slots.

2. Remove the bulb from the socket by pressing it in, then turning it counterclockwise until the bulb tabs align with the socket housing. Remove the bulb from the socket.

3. Insert the new bulb into the socket and turn it until it locks in place.

4. Place the socket into the headlamp assembly so that the socket tabs align with the slots in the assembly. Insert the socket into the assembly, then turn it clockwise.

Side Marker Lamps

1. Remove the socket from the assembly by pulling it outward.
2. Remove the bulb from the socket by pulling it out.
3. Insert the new bulb into the socket.
4. Install the socket into the assembly by pressing it in.