Engine Control System/Fuel System

Accelerator Pedal Repair Procedures

3steps
~18min
2/5difficulty
0102030405013.710N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Removal

  1. Turn the ignition OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (A), then remove the accelerator pedal module.

Installation

  1. Install in the reverse order of removal. Accelerator pedal module mounting nut: 8.8–13.7 N·m

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.