Hyundai Kona Quiz
Engine Control System/Fuel System

Fuel Line Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
9steps
~54min
3/5difficulty
010203040505.94N·mlb·ft
Tightening torque found on this page
Done 0 of 9

Removal

  1. Release the residual fuel pressure in the fuel line. (Refer to Fuel System - "Release Residual Fuel Pressure in Line")
  2. Turn the ignition off, and then disconnect the negative (-) battery terminal.
  3. Disconnect the quick-connect coupling of the fuel feed tube (A).
  4. Disconnect the vapor hose (A) connected to the PCSV.
  5. Raise the vehicle.
  6. Remove the fuel tank. (Refer to Fuel System - "Fuel Tank")
  7. Remove the fuel line and brake line protector (A).
  8. Remove the clamps (A) of the fuel line and vapor line.
  9. Remove the fuel line.

Installation

  1. Install in the reverse order of removal. Delivery pipe nut (to fuel feed tube): 3.9–5.9 N·m

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.