Engine Control System/Fuel System
Fuel Pump Control Module (FPCM) Repair Procedures
In this manual: Engine Control System/Fuel System
8steps
~48min
2/5difficulty
Done 0 of 8
Removal
- Release the residual fuel pressure in the fuel line. (Refer to Fuel System - "Release Residual Fuel Pressure in Line")
- Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly")
- Remove the fuel pump service cover (A).

- Disconnect the connector (A) of the fuel pump control module.
- Disconnect the fuel pressure sensor (FPS) connector (B).
- Disconnect the quick-connector of the fuel feed tube (C).

- Remove the snap ring (A) using the Special Service Tool [No.: 09310-B8100].

- Remove the fuel pump from the fuel tank.

Test yourself
A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?