Brake fluid
Brake Fluid Level Inspection
.jpg)
Check the fluid level in the reservoir periodically. The fluid level should be between the MAX and MIN marks on the side of the reservoir.
Before removing the reservoir cap and adding brake fluid, clean the area around the reservoir cap to prevent brake fluid contamination.
If the level is low, add the specified brake fluid to the MAX level. The level will decrease with accumulated mileage. This is normal and is related to brake pad wear. If the fluid level is too low, have the brake system inspected by an authorized HYUNDAI dealer.
WARNING
If the brake system requires frequent fluid additions, this may indicate a leak in the brake system. Have the vehicle inspected by an authorized HYUNDAI dealer.
WARNING
Do not allow brake fluid to contact your eyes. If brake fluid gets into your eyes, flush your eyes with clean water for at least 15 minutes and seek medical attention immediately.
NOTICE
- Do not allow brake fluid to contact the vehicle body paint, as it will damage the paint.
- Brake fluid that has been exposed to air for a long time should NEVER be used as its quality cannot be guaranteed. It must be disposed of properly.
- Do not use the wrong type of brake fluid. A few drops of mineral-based oil, such as engine oil, in the brake system can damage the brake system components.
Information
Use only the specified brake fluid (refer to "Recommended Lubricants and Capacities" in Chapter 2).
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.