High Beam Assist Malfunction and Limitations

High Beam Assist Malfunction

When the High Beam Assist system does not operate properly, the "Check High Beam Assist (HBA) System" warning message will appear and theindicator light will illuminate on the cluster. Have the vehicle inspected by an authorized HYUNDAI dealer.

High Beam Assist Limitations

High Beam Assist may not operate properly in the following situations:

• Light from an oncoming or preceding vehicle is not detected due to a damaged lamp, or because it is hidden from view, etc.
• The headlights of an oncoming or preceding vehicle are covered with dust, snow, or water.
• The headlights of an oncoming or preceding vehicle are off, but the fog lights, etc. are on.
• A similar lamp in the shape of a vehicle light is present.
• The headlights are damaged or have not been repaired properly.
• The headlights are not aimed properly.
• Driving on a narrow curved road, a winding road, an uneven road, or up or down a hill.
• The vehicle ahead is only partially visible at an intersection or on a curved road.
• A traffic light, reflective sign, flashing sign, or mirror is ahead.
• A temporary reflector or flashing light is ahead (construction site).
• Road conditions are poor, such as wet, icy, or snow-covered roads.
• A sudden curve appears.
• The vehicle is tilted due to a flat tire or is being towed.
• Light from an oncoming or preceding vehicle is not detected due to an obstacle in the air, such as exhaust smoke, fog, snow, or water spray or blizzard on the road, or fogging on the lamp, etc.

Information

For more detailed information on the front camera limitations, refer to the "Forward Collision-Avoidance Assist (FCA)" section in chapter 7.

WARNING

• The High Beam Assist system may not always operate properly. It is the driver's responsibility to practice safe driving and always check road conditions for safety.
• If the High Beam Assist system does not operate properly, manually change the headlight position between high and low beam.