Cargo Bed Features

Tonneau Cover

Tonneau Cover Locking

Turn the lock handle 90 degrees counterclockwise to lock the tonneau cover.

Tonneau Cover Unlocking

Turn the lock handle 90 degrees clockwise to unlock the tonneau cover.

Emergency Release

Pull the emergency release lever.

Fully Open Tonneau Cover

1. Make sure the tonneau cover is unlocked.

2. Push the cover handle forward until it is unlocked. The handle will remain in the unlocked position.

3. The tonneau cover will fully retract.

Information

The purpose of the tonneau cover is to protect the bed from rain and dirt:

• Designed to resist rainwater, some water may still enter. Water may enter at the tailgate area due to lack of sealing.
• Dust may enter the compartment through various gaps around the tailgate area, other seals, etc.

Fully Closing Tonneau Cover

1. Use the strap to pull the tonneau cover until the handle can be reached.

2. Return the handle to the "locked" position.

3. Pull the tonneau cover back until the latch pins engage on the tailgate.

Half Open Tonneau Cover (From Open)

1. Pull the strap 45 degrees to the left to return the handle to the "locked" position.

2. Use the strap to close the cover to the half-open position, then release. A click will be heard when the latch pins engage.

Half Open Tonneau Cover (From Closed)

1. Push the cover handle forward until it is unlocked. (The handle will remain in the unlocked position.)

2. Return the handle to the "locked" position.

3. The tonneau cover will open and stop at the half-open position.

NOTICE

• The tonneau cover is made of aluminum profiles that heat up and cool down relatively quickly depending on weather conditions. This may cause condensation inside the profiles and panels.
• The pull strap is designed only for opening and closing the tonneau cover. The carabiner and ring will be damaged under excessive load.
• Items in the bed must be secured during transport to prevent damage to the tonneau cover structure (especially the canister).
• If the tonneau cover is closed and there is water, snow, ice or dirt on the cover, it may enter the pickup bed as the cover retracts. To avoid this, clean the top surface of the cover before opening.
• When opening the cover, operate it carefully using the pull strap so the cover does not strike the forward end of its full travel range, which it is NOT designed for.

PLEDGE

• The tonneau cover is not designed for loading, although it can support normal snow loads. Do not place any load or person on any part of it, as the product may be damaged if someone stands on it.

WARNING

• Do not drive with people riding under the tonneau cover.
• Do not allow people or animals to remain in the pickup bed when the cover is closed.
• Temperature may become very high when the cover is closed.
• The pull strap should not be used to tie down cargo.
• Do not disassemble the main shaft from the canister without fully releasing the spring tension.
• Keep fingers away from the slats when opening and closing.
• We do not recommend washing the tonneau cover in a touchless car wash, as the cover may be damaged by chemicals.
• Clean the tonneau cover regularly using regular car shampoo and a soft, lint-free cloth or brush.
• If washed at any car wash, or if any chemicals are used on the tonneau cover, make sure the pH value does not exceed 8.