Brush Replacement

If the wipers do not clean the glass properly, the blades may be worn or damaged and must be replaced.

Type A

1. Lift the wiper arm and rotate the blade assembly to access the lock.

2. Press the button and pull the wiper blade up.

3. Remove the blade from the arm.
4. Install the blade in the reverse order of removal.

Type B

1. Lift the wiper arm.

2. Lift the wiper blade clip. Then lower the blade assembly and remove it.

3. Install the new blade assembly in the reverse order of removal.

Rear Wiper Blade (if equipped)

1. Lift the wiper arm and remove the rear wiper blade assembly.

2. Install the new wiper blade assembly by inserting the center part into the wiper arm slot until it clicks.
3. Make sure the wiper blade assembly is securely attached by gently pulling on it. To avoid damaging the wiper arms or other wiper components, have the wiper blade replacement performed by an authorized dealer.