Fuses

Fuses are used to protect the vehicle's electrical system from damage caused by electrical overload.

This vehicle has 2 (or 3) fuse panels. One is located in the driver's side instrument panel and another is located in the engine compartment.

If any of the lights, accessories or controls do not operate, check the fuse for the related circuit. If a fuse is blown, the element inside the fuse will be melted.

If the electrical system does not operate, first check the fuse panel located on the driver's side.

When replacing a blown fuse, always use a fuse of the same amperage rating.

If the new fuse blows again, the electrical system may be malfunctioning. Stop using the related system and consult an authorized HYUNDAI dealer.

Three types of fuses are used: blade-type fuses for low current, cartridge fuses, and multi-fuses for high current.

WARNING

- Fuse Replacement

• Always replace a blown fuse with a fuse of the same amperage rating.
• Installing a fuse with a higher amperage rating may cause severe damage to the electrical system and may cause a fire.
• Never use wire or aluminum foil in place of a fuse, even as a temporary measure. This may cause severe damage to the wiring and possibly a fire.