Replacing an Engine Compartment Fuse

1. Turn the ignition switch and all other switches to the OFF position.
2. Press the fuse panel cover and remove it.
3. Check the removed fuse; if it is blown, replace it with a new one. Use the fuse puller provided to remove or install a fuse in the engine compartment fuse panel.
4. Insert a new fuse of the same rating and make sure it is securely held in the clips. If the clips are loose, contact an authorized HYUNDAI dealer.

Multi-fuse

If the multi-fuse is blown, it must be replaced. Replacement is performed in the following order:

1. Remove the fuse panel located on the right side of the engine compartment.
2. Remove the nuts shown in the illustration above.
3. To replace a blown fuse, always use a fuse of the same rating.
4. Installation is performed in the reverse order of removal.

NOTE

If the multi-fuse is blown, contact an authorized Hyundai dealer.