Manual TrailCam Activation

The TrailCam view can be activated using the following methods:

• Press the "FWD Camera" button on the control screen.
• Press the "Front Camera" button in the applications menu.
• Press the "TrailCam" button on the Off-Road Pages.
• Press the "Off Road+" button when "Auto Launch Off Road+" (if equipped) is selected in the camera settings.

The TrailCam view can also be activated by pressing theicon on the Rear Camera view. The rear camera view can also be activated by pressing theicon on the TrailCam view.

When the vehicle is shifted out of REVERSE (with camera delay disabled) and the TrailCam view is active, the TrailCam view will exit and the previous screen will reappear.

When the vehicle is shifted out of REVERSE (with camera delay enabled) and the TrailCam view is active, the TrailCam image will be displayed for up to 10 seconds, unless the vehicle speed exceeds 13 km/h, the transmission is shifted to PARK, the ignition is in the OFF position, or the touchscreen "X" button is pressed to turn off the TrailCam view display.

Whenever the TrailCam image is activated using the manual activation methods and the vehicle speed is greater than or equal to 8 mph (13 km/h), the image display timer is initiated. The image will continue to be displayed until the display timer exceeds 10 seconds.

NOTE:

• If the vehicle speed remains below 8 mph (13 km/h) in 2WD or 4WD High mode, the TrailCam image will be displayed continuously until deactivated by the touchscreen "X" button, the transmission is shifted to PARK, or the ignition is placed in the OFF position.
• The touchscreen "X" button to turn off the camera image display becomes available ONLY when the vehicle is not in REVERSE.
• The TrailCam image will remain active regardless of vehicle speed and time in 4WD Low mode.