Hybrid Control System
BMS ECU Repair procedures
In this manual: Hybrid Control System
4steps
~24min
3/5difficulty
Done 0 of 4
Removal
Shut off the High Voltage circuit.
(Refer to Hybrid Control System - “High Voltage Shutoff Procedure”)
Remove the high voltage front cover.
(Refer to High Voltage Battery System - "Case")
Disconnect the BMS ECU Connector (A).
Remove the BMS ECU (B) after loosening the mounting nuts.
BMS ECU mounting nut : 7.8 - 11,8 N·m


Installation
Install the BMS ECU in the reverse order of removal.
Was this page helpful?