Hybrid Control System
Safety Plug Repair procedures
In this manual: Hybrid Control System
7steps
~42min
4/5difficulty
Done 0 of 7
Removal
Switch "OFF" the ignition and disconnect the negative (-) terminal of the auxiliary 12V battery.
Remove the safety plug cover (A).

Unfasten the hook (A) in the direction of arrow.

Unfasten the lever (A) in the direction of arrow.

Remove the safety plug (A).

Inspection
Remove the safety plug.
(Refer to "Removal")
Visually check the safety plug and conduct electrical test.
- Check the interlock switch (A) and high voltage terminal (B).

Installation
Install the Safety Plug in the reverse order of removal.
Was this page helpful?